Threaded Moisture/Water Separators
High quality compressed air is essential to pneumatic and automation systems. Correct air preparation is imperative in order to minimize component failure, increase the operating life of equipment and reduce energy consumption.
Water vapour occurs naturally in air and is present in the hot air discharged from air compressors. This hot air will then release condensate as it meets the colder surfaces of down-stream equipment. Although the condensate can be removed via drains, liquid will remain in the air stream. This liquid condensate will break down lubricating oils increasing friction between moving surfaces and corrode exposed metal components.
For compressed air installations where water contamination is a real problem, the Walker Filtration range of water separators offer an effective solution. Typically, water separators are installed downstream of after coolers and air receivers, refrigerant dryers and at strategic points in pipe work installations. Specially designed, Walker Filtration's water separators utilize an internal spinner which removes large quantities of condensate by centrifugal action. Water separators are available for operating pressures up to 16 bar (232 psig).
Product PDFs
IPAC Moisture Separator Manual
Threaded and Flanged Compressed Air Filter Manual
Walker Threaded and Flanged Water Separator Manual
| Technical Specification | |||
| Model | Pipe Size | Flow | |
| Nm³/hr | SCFM | ||
| A20 WS | 1/4" | 35 | 20 |
| A30 WS | 3/8" | 56 | 33 |
| A50 WS | 1/2" | 112 | 66 |
| A75 WS | 3/4" | 216 | 127 |
| A100 WS | 1" | 300 | 176 |
| A125 WS | 1 1/4" | 540 | 318 |
| A150 WS | 1 1/2" | 725 | 427 |
| A200 WS | 2" | 1150 | 675 |
| A250 WS | 2 1/2" | 1700 | 1000 |
| A300 WS | 3" | 2550 | 1500 |